Many of our clients frequently ask how to properly care for their countertops and floors. So here are a few tips just for you when cleaning your kitchen, bathroom, or basement surfaces…
Solid Surface Counters and Sinks:
DO use a nonabrasive, all-purpose cleaner. Rinse with water, use cotton cloth to dry. Wipe up immediately to prevent discoloration.
DON’T flood the laminate. Water penetrates seams, causing swelling. Don’t use abrasive cleaners, steel wool or scouring pads. Cleaners with acid will cause permanent discoloring.
DO wipe floors with a damp cloth or sponge.
DON’T wet mop or pour water on floor. Don’t wax, sand or stain.
DO use nonabrasive, all-purpose cleaners, a tub/tile/sink cleaner or liquid cleanser. Rinse thoroughly with water and buff tiles with dry cloth to prevent water stains. Re-apply grout sealer every 5-10 years.
DON’T use powdered abrasive cleaners that may scratch the surface. Solid Surface
Counters and Sinks:
DO use a nonabrasive all-purpose cleaner and a damp cloth on matte, satin or high gloss finishes. A scouring pad will remove cigarette burns and minor scratches.
DON’T use strong chemical cleaners such as toilet bowl cleaners, ceramic cook top cleaners, paint remover, drain cleaners, oven cleaners and lacquer thinners.
DO place coasters under glasses, and wipe up spills immediately. Use entry rugs to capture abrasive dirt from foot traffic. Wash with warm water, a neutral pH cleaner and a nonabrasive cloth.